Sort By:   GridListGallery

Search Results

$75

 : 0 |   : 0

classified

For Sale is a 15 Element 23CM Beam.EC  $75,Pickup ONLY.

$0

Plug for PRC-64 Morse Key
 : 2 |   : 0

classified

I am after the morse key plug for a PRC-64 radio. It is either Winchester Electric M7P or Allied Electronics 126-1059. I have had a quote for the Winchester Electric at $167 plus freight to Australia for minimum order of five plugs which is way over...

$650

Yaesu FT450D
 : 5 |   : 0

classified

<p>Yaesu FT450D. 100W HF and 6m Excellent, unmarked, faultless condition. Very little on-air time. Never mobile. Non smoking shack. Comes with original packaging, manual, mic and power cable as per photos.   Built in automatic ATU IF...

$60

Kenwood TSU-5 CTCSS Decoder TS790A
 : 2 |   : 0

classified

Kenwood TSU-5 CTCSS Encoder/decoder for TS790A. This is a genuine kenwood part and comes with interface cable. I have 2 available @ $60ea Postage $10 Australia Wide.

$30

Icom UT51 Tone Encoder IC229 IC449 IC3220 P2A P4A
 : 1 |   : 0

classified

Icom UT51 Tone Encoder for IC229, IC449, IC3220, P2A & P4A. New in box. Note: This is a tone encoder only for repeater access, it does not decode CTCSS for receive. Some versions of these radios already transmit tone standard so make sure you...

$0

 : 0 |   : 0

classified

Hi, I'm looking for either a stuffed x1m or a lcd display for the same, with the fragile cable attached!   Mine has fractured where the cable and the display are soldered, and the wires are much too small for my eyes to be able to repair....

$0

 : 0 |   : 0

classified

Has anyone got a surplus XRef-FT they would like to sell?

$235

HAMPARK ANTENNA
 : 4 |   : 0

classified

Continuing on in the renowned Famparc antenna tradition here is the HAMPARK ANTENNA. This antenna is pre-tuned to cover the 8 ham frequencies 3.5, 7, 10, 14, 18, 21, 24 and 28 Mhz. No tuning is required simply connect the wander lead inti the tap...

$490

OPTIBEAM OB9-5
 : 1 |   : 0

classified

Optibeam OB9-5 covers 10,12,15,17 and 20mtrs band.Single coax cable feed line,no traps,no coils,no moving parts. Can handle 2KW with ease.Just removed from my tower because we are moving house. Cost new approx.$2000.00 Build quality is excellent...

$0

 : 0 |   : 0

classified

I have two control boxes & all the 4-wire cable required but a beyond economical repair, dead rotator unit & would very much like to replace it with one of the same breed. Does anyone out there have a good working AR-22R rotator that they...

$850

ICOM   IC - 7400
 : 6 |   : 0

classified

<strong>ICOM  IC-7400 TRANSCEIVER </strong><strong>Hi there, I have an ICOM  IC-7400 surplus to my requirements. </strong><strong>It is in excellent order from a non smoking environment. The screen is, bright...

$300

Trimble Thunderbolt GPSDO
 : 5 |   : 0

classified

<p>Trimble Thunderbolt GPS Disciplined Oscillator was manufactured around 2002 with improved Trimble double-oven 10 MHz Xtal oscillator that is conditioned with GPS signals.  The FPGA has firmware 3.00 and runs TSIP serial protocol by...

$375

 : 0 |   : 0

classified

I have too many headsets so it is time to move this one on. It has both the electret/condenser microphone and cable for Icom radios and the dynamic microphone and cable for Kenwood and Elecraft radios. Further cables can be bought from RF Solutions...

$35

Kenwood MB-201
 : 2 |   : 0

classified

<strong>Kenwood MB-201 Mobile Bracket</strong> <strong>New unfitted bracket with original box, instructions, bracket and hardware.</strong> <strong>Buyer to pay postage.</strong> <p><strong>Call or text on...

$195

## NEW FOUNDATION MOBILE ANTENNA FOR 40/15/10  ##
 : 4 |   : 0

classified

This Tri-Band mobile whip antenna covers 40, 15 and 10 metres and is optimized those 3 foundation bands. The wander-lead is only required for 15 and 10 meters making it a streamlined antenna on 40. A 1/2 inch whit base is required for mounting...

$800

Icom IC-746Pro
 : 6 |   : 0

classified

<p><strong>Selling Icom IC-746Pro. HF, 6 met & 2 Met. Full output on all bands, no issues. In VGC. Front Panel is unmarked, slight marks on the top bezel. Sides in very good condition. Display has no issues, bright and full of contrast....

$0

Wanted: sheet metal CNC work done
 : 3 |   : 0

classified

Hi all, I'm not mechancially minded and I need some items made. I'm after either info on chinese cnc/laser cutting sheet metal shops that are cheap, analogous to the PCB workshops (fastpcb, electrow etc) but for sheet metal. Does anyone know...

$3,950

HENRY 2000 WATT UHF AMPLIFIER
 : 3 |   : 0

classified

<p>I bought this amp a few years ago and have never turned it on... it is as new..</p> <p>If you have any questions about it please ring me on ........... 0416 403 111</p> <p>Below are the specs.</p> <p>I will deliver in the...

$80

Uniden Sundowner UH088 UHF CB
 : 1 |   : 0

classified

Uniden UH088 Sundowner, was bought new to fit into xyls SR5, somehow it never happened.  Its been sitting on my shelves for quite a while and now fitting a full HF VHF UHF to Samanthas car so no need for the UHF CB radio.  Its pretty...

$100

DV4mini
 : 1 |   : 0

classified

The DV4mini is a tiny USB stick that can change any PC into a HOTSPOT for the all amateur digital modes, C4FM, D-Star and DMR.  It contains a powerful 32-bit micro controller as well as a complete 70cm transceiver and modulator/demodulator...

$475

Icom IC2800H VHF/UHF Dualbander remote head system
 : 1 |   : 3

classified

Icom IC2800H, probably one of the most versatile dual banders Icom ever made. The 2800H had so many great uses,with features that  many radios  just could not stretch to. Can be posted Australia  wide at buyers cost no problems....

$25

XY-404 Tips for DickSmith T2200 Soldering Station
 : 1 |   : 0

classified

For sale 3 pcs XY-404 soldering iron tips suitable for Dick Smith T2200 soldering station. These are the more expensive Japanese made tips (Pb free) unlike the Taiwan made which are cheaper. $25 for the lot of three tips.

$150

HyGain 244 - 2 Element Quad 20/15/10
 : 1 |   : 0

classified

Hy Gain 2 Element Quad, 20/15/10m - unsure of model number. In good condition, comes with all wiring etc. <strong>Model number is 244, thanks to Richard - VK2SE for the info, appreciated.</strong> <span style="color:...

$70

Morse Code Key - P.M.G. 1941 WWII era
 : 6 |   : 0

classified

<p><strong>Morse Code Key - WWII Historical Significance </strong></p> <p> </p> <p> </p> <p>Listing: P.M.G. 1941 WWII era Morse Code telegraph...

$250

TH6 Yagi 20/15/10
 : 2 |   : 0

classified

TH6 Yagi up for sale. In good condition. The insulation tape seen in photos is to hold the elements together for easy transportation, the boom comes apart in two sections. Could easily be transported in a ute or similar vehicle, or a car with roof...

$90

Bently Nevada 3115 Series Proximitor
 : 6 |   : 0

classified

<p><strong>Bently Nevada 3115 Series Proximitor </strong></p> <p> </p> <p>Listing is for 2 x Bently Nevada Proximitor units.</p> <p> </p> <p>Type calibration:...

$250

Rocketstor Thunderbolt to SATA Dock
 : 6 |   : 0

classified

<p><strong>Highpoint Technology RocketStor </strong></p> <p><strong> </strong></p> <p><strong>Model 5212 - 10Gb/s Thunderbolt to SATA Docking Station </strong></p> <p> </p> <p>Note 1: This...

$85

Adonis Desk Microphone
 : 6 |   : 0

classified

<p><strong>Adonis Desk Microphone Model: 503G </strong></p> <p> </p> <p>Very Good Condition but noise reduction foam is old - Original box and manual. Please see the photos.</p> <p> </p> <p>Has many...

$320

RF Power Amplifier Kit - MOSFET Amplifier MRF141G
 : 6 |   : 0

classified

<p><strong>RF Power Amplifier Kit - MOSFET Amplifier using MRF141G</strong></p> <p><strong> </strong></p> <p>Communications Concepts - <strong><u>Unbuilt kit</u></strong> - Model Number...

$90

LDG AT-897 Plus Antenna Tuner - Not working
 : 5 |   : 0

classified

<p><strong>LDG AT-897 Plus Antenna Tuner</strong></p> <p> </p> <p>Very likely to be a <u>Not Working Unit</u></p> <p> </p> <p>This is the AT-897 PLUS, not the previous model the...

$1,234

Radio Manuals
 : 6 |   : 0

classified

<p><strong>Ham Radio Equipment Manuals</strong> Below is a list of manuals for older ham gear. These are original paper manuals, not photocopies. BUT, they are old and not in perfect condition. Most are ok except for showing their...

$100

 : 0 |   : 0

classified

Here we have a Powertech Switchmode PSU. Unit is basically nnew in box, it was used for a short few hours for testing some equipment. I have changed the Power LED to a brighter Blue, the orignal LED was extremely Dull. Prefer local Pick up,...

$60

 Moxa EDS-205A (12 - 48 VDC)
 : 3 |   : 0

classified

have 2 pcs Moxa EDS-205A (12 - 48 VDC) Mounted on one plate Used, but in excellent condition. $60 the set.

$260

LDG KT-100 with 2 cables
 : 2 |   : 0

classified

In excellent condition, the photo's are not of the unit for sale but it's as good condition. Contact Paul on 0265843772  or email  vk2del@gmail.com Cheers.

$0

 : 0 |   : 0

classified

<p>I am looking for Traeger HF radio transceivers & associated equipment.</p> <p>If you can help, please contact me.</p> <p>Thank you for looking, Gary VK4AR.</p>

$120

4 SQ QRP 40m 9W SS-TX, SS-RX and Magic Box stn
 : 1 |   : 0

classified

<p><span style="font-family: Comic Sans MS; font-size: large;">For sale is are three highly-rated, unbuilt 4-Square QRP kits to build a high-performance 40m QRP CW station, with full-break-in and capable of up to 9W output. The items are:...

$123,456

 : 0 |   : 0

classified

Hi im still  after a YAESU FT-200D FOR PARTS ONLY so a realstic price would be good, can be working or not. Email me if you have one please, thanks for looking Ted  VK3DW

$12,345

 : 0 |   : 0

classified

Hi im STILL looking for a LDG AT-200pro 2 if you have one your not using or just want the money email me I'm sure we can work some thing out. thanks for looking, Ted   VK3DW

$0

ICOM UX-910
 : 1 |   : 0

classified

Wanted: ICOM UX-910 23cm module in good working order

$0

 : 0 |   : 0

classified

Looking for parts for restoration. 75S3 bezel (escutcheon), concentric RF/AF gain knobs, L10, or WHY.

$200

 : 0 |   : 0

classified

<p>G’day</p> <p>After recently selling my two Drake TR-7s, I found a box with the following 'as new' items accessories/replacement items, which are now surplus to requirement:</p> <ul> <li>N4YG Direct Digital Synthesis VFO...

$300

 : 0 |   : 0

classified

<span style="font-size: 12pt;"><strong>Here we have a Kenwood UHF Commercial Radio (LOW BAND).</strong></span> <span style="font-size: 12pt;"><strong>Has been used as a 70CM radio, will be sold Programmed to Licence...

$285

 : 0 |   : 0

classified

<strong><span style="font-size: 12pt;">Here we have a Kenwood Commercial VHF Radio,</span></strong> <strong><span style="font-size: 12pt;">Has been used as a 2M radio, will be sold Programmed to Licenced...

$200

Anytone AT - D868UV Dual Band Analog/DMR HT
 : 1 |   : 0

classified

Hello Everyone, Up for grabs is my Anytone Dual Band DMR HT. Radio is running the most current Firmware V2.33, Comes with the factory items, Antenna, Belt Clip, Charger, Programming Cable & I will supply copy of the Current Software for...

$285

SWR HF Vector Antenna  Impedance Analyzer Meter
 : 1 |   : 1

classified

<strong>I have  turned this great little unit on 7-8 times to go through the functions with the manual. I have not used it to measure  any antenna. I am selling it as used although it is as new, for a price $80 cheaper than the lowest...