
AUD 2,200.00
Quantity Available
1
Posted
1 week ago
Description
ONO. 160 to 10m including WARC, all mode dual VFO transceiver with sub receiver, (NOT the RX 366 and of the optional filters, only 1.8kHz is installed.)
Comes with a genuine #707 microphone and Model 310 PA fan. This model includes an internal tuner (for ANT 1 only) that is actually decent. (Ten-Tec state 6 to 800 ohms; up to 10:1 SWR. An external LDG is usually 6 to 1000 ohms and the internal ATU for the IC-7610 is 16.7 to 150 ohms). NR, AGC and RF gain circuitry that when properly combined will blow your mind, sweep function, amplifier and transverter connections, RX antenna connector with antenna memories.
Modified with VE7TK 9MHz IF circuit tap and includes a Noble Radio NR-PAN3K Panadapter that interfaces with (NOT included) HDSDR and HRD (CAT) on a Windows PC. This is a cumbersome thing to set up and completely unnecessary for normal operation of the rig (since it has a sweep display built in) but those willing to dive in can check the video I made for setting up the external panadapter for this radio below:
https://youtu.be/XaUnW4gFGvo?si=j1a9JqHcsGQFfsKT
This is a beastly radio. It is unlike a Yaesu or Icom to operate, but is very rewarding once mastered and you won't be disappointed if you know what you're looking at. Just make sure you've got plenty of room! Delivery will require some wrangling due to its size and heft but is packed ready for shipping. Original box and manual. No trades, no separation of components. This has been my centrepiece for a few years. Selling because I am scaling back on amateur radio.
Comes with a genuine #707 microphone and Model 310 PA fan. This model includes an internal tuner (for ANT 1 only) that is actually decent. (Ten-Tec state 6 to 800 ohms; up to 10:1 SWR. An external LDG is usually 6 to 1000 ohms and the internal ATU for the IC-7610 is 16.7 to 150 ohms). NR, AGC and RF gain circuitry that when properly combined will blow your mind, sweep function, amplifier and transverter connections, RX antenna connector with antenna memories.
Modified with VE7TK 9MHz IF circuit tap and includes a Noble Radio NR-PAN3K Panadapter that interfaces with (NOT included) HDSDR and HRD (CAT) on a Windows PC. This is a cumbersome thing to set up and completely unnecessary for normal operation of the rig (since it has a sweep display built in) but those willing to dive in can check the video I made for setting up the external panadapter for this radio below:
https://youtu.be/XaUnW4gFGvo?si=j1a9JqHcsGQFfsKT
This is a beastly radio. It is unlike a Yaesu or Icom to operate, but is very rewarding once mastered and you won't be disappointed if you know what you're looking at. Just make sure you've got plenty of room! Delivery will require some wrangling due to its size and heft but is packed ready for shipping. Original box and manual. No trades, no separation of components. This has been my centrepiece for a few years. Selling because I am scaling back on amateur radio.
Accessories Included
Original Packaging
Condition of Item
Excellent
Payments Options
-
Paypal
-
Direct Deposit
-
Cheque
-
Cash
Postage - Freight
Buyer Pays