Panel Metered DS-2c Controller & CD-45 rotator with top mast clamp, hardware, plug for control cable, IEC power lead & revised manual.
Wind Area .............. 0.79m Sq.
Rotation Torque .....9.21 Kg/m
Brake Torque ......... 9.21 Kg/m
Mast Size ............... 50mm
Rotation Time ....... 60 second 360 degree
Control Cable ........5 core
Rotator Voltage .....24vAC.
12 month warranty (extendable to 24 month for an extra $100.00)
The DS Panel metered Controller :- Replacement controller for upgraded CD-45 series rotators.
This controller has panel meter direction display & a single 2 way paddle style direction switch.
Features:- New enclosure with my all new stainless steel sub chassis, New Compact CDE/HyGain PCB with LED power supply on board, Two x 240v transformers, Single two way direction paddle switch, Panel meter is from CDE controller with LED illumination, Fused IEC socket on back panel, 6 pin Cinch socket, New Calibration POT.
Supplied with new 6 pin Cinch plug & IEC power lead.
The CD-45 Rotator :- Has a friction brake in the motor & has fully refurbished & upgraded.
The New parts are:- Stainless steel folded mast clamp, Bearings, mounting hardware etc.
A lot of the imperial threads have been drilled out & had metric M4 or M6 RECOIL's installed.
The motor start CAP was moved to the rotator (saving 2 wires), meaning you can use 5 core control cable.
Some of the original gears were replaced as they had been hitting each other (not properly shimmed up), All gears were shimmed & aligned when installed into the sub chassis with new grease.
Installed new ball bearings & reassembled with new grease through out.
Aligned & Calibrated with the controller.
Includes top mast clamp & mounting hardware.
240vAC. 12 month warranty (extendable to 24 month for an extra $100.00).
This Rotator Set is also available for exchange. see details on my web site.
Contact Peter via the embedd email service provided by VK Classifieds.
Paypal
Direct Deposit
Cheque
Cash