Posted
May 07, 2024
Description
I recently built a homebrew Hexbeam and produced a second base plate from excess aluminium.
The aluminium base plate was designed to use the Haverford 5m Squid Poles (multi-purpose). I also used a squid pole section for the centre post which fits into the pipe with the addition of a small aluminium shim, centre post not included. (See picture)
Base plate is 5mm thick
Pipe is 38mm outer diameter and 32mm inner diameter
Ubolt holes are 58mm egde to edge
Ubolts not included
The aluminium base plate was designed to use the Haverford 5m Squid Poles (multi-purpose). I also used a squid pole section for the centre post which fits into the pipe with the addition of a small aluminium shim, centre post not included. (See picture)
Base plate is 5mm thick
Pipe is 38mm outer diameter and 32mm inner diameter
Ubolt holes are 58mm egde to edge
Ubolts not included
Condition of Item
Good
Payments Options
- Paypal
- Direct Deposit
- Cheque
- Cash
Postage - Freight
Buyer Pays
Estimated Postage
$ 40.00