FOR SALE ON BEHALF OF A FRIEND.
(Stored inside warehouse @ Arndell Park 2148, west of Sydney).
NEW, Never Installed & has never been outside.
Here we have a purpose built 5.5m All Aluminium Elevated Lay-Over Mast Support.
The 63.5 x 6.35mm wall x 6.5m structual aluminium round tube (which make up the total height of 9.6m) is NOT included.
This structure was designed & built to be mounted onto the side of a building & the elevated pivot point of the 63.5mm mast section was to get over top of equipment on the ground.
The project was scraped before mast support was finished & now the Mast Support must go, SOLD AS IS.
The back bone of the structure is a 5.5m structural U channel 101.6 x 50.8 x 7.9mm, other materials are 32sq tube x 3mm runners, 31.6 x 6mm flat bar diagonal bracing, 160 x 280 x 10mm flat bar winch mount, 50 x 12mm & 80 x 10mm flat bar strenghing plates & braces, 32 x 3 u channel gussets & lots more. The whole structure has been bolted with S/S nuts bolt & screws then welded.
Included a specially mast clamp which was made from a 92mm (6061 T5) solid round bar, that was bored out to 63.5mm then machined for the 4 x M8 bolts & followed by cutting out of the 5mm clamping gap.
The hand winch is a RigMate (by A.Nobles & sons) rated @ 500kg lift with 5mm S/S wire rope.
The winch was mounted to the top of the structure to be operated from the roof of the support buliding, mainly for security. I have lots of photos & basic plans etc.
Contact Peter 0427 043 054