Back to normal browsing Browse All Recent Listings 24 hours 1 week 2 weeks 3 weeks

Sort By:   GridListGallery

Newest Classifieds in Meters/Test Equipment


HP8924C  HP test set
 : 1 |   : 0

Hi all. Starting to clear the shack of unused equipment. I have a HP8924C cdma test set to sell. 30-1000mhz usable below 10mhz. am,fm,ssb demod. 60w input attenuator. Has the usual spectrum analyzer, rx, tx analyzers, oscilloscope and high stab...


TTI 2MHz & 3MHz  Fuction Generators
 : 1 |   : 0

Hi all, I have for sale a couple of function generators. They are all Thurlby Thandar, two models available, a 2MHz version and a 3MHz version. Comes with operator and service manual via email.   FREQUENCY: .02(0.03) Hz to 2 MHz (3...


Weinschel VM-4B Attenuator & Sig Gen Calibrator
 : 6 |   : 0

Weinschel VM-4B Attenuator and Signal Generator Calibrator & VM-4/HO-2A On offer here is a professional standard Weinschel VM4B / HO2A combination test set for calibration of signal generators or attenuators over the frequency range of 1000 KHz...


HP Agilent 3586A Selective Level meter
 : 6 |   : 1

<p>On offer here is a perfectly working HP3586A Selective level meter receiver fitted with the Hi Stability OCXO.</p> <p>It can measure levels to 0.1 dB, accurately.</p> <p>Easily measure and monitor all HF frequencies up to just...


HP Agilent 8405 Vector Voltmeter
 : 6 |   : 1

<p>Here is an HP / Agilent 8405 Vector Voltmeter complete with the hard to find HP 11570A accessory kit.</p> <p>This unit will measure from LF / HF into the Ghz range as can be seen on the range switch picture at top...


HP Agilent HP 432B Power meter COMPLETE
 : 1 |   : 1

Here is an HP / Agilent power meter model 432B complete with the sensor cable and model 478A thermistor mount. The power meter has switched options for 240 or 117 117VAC operation. I have checked this power meter out on my own system with Rhode...


HP Agilent 432A Power meter plus Thermistor mount.
 : 4 |   : 1

<p>Here is an HP / Agilent power meter model 432A <strong>complete with the sensor cable and model 478A thermistor mount with attached calibration information chart.</strong></p> <p>The power meter has switched options for 240 or 117...


Royce Field Strength and SWR Meter
 : 1 |   : 0

Royce Model 2-100 Field Stength and SWR meter in A1 cosmetic and electrical condition covering 3.5 to 150MHz. Purchaser pays freight. Don't email but instead call me (Jim) after 10am any day on 08 83820504 if interested.

Newest Auctions in Meters/Test Equipment


Faulty HP 5335A Frequency Counter
 : 1 |   : 0

Faulty HP 5335A counter, I think the fault is a missing ROM or part of the processor or something like that so maybe the samplers still work. Perhaps. Possibly. And maybe the oven if it has one.    Local pickup from near Camberwell...

time left: 6 d, 0 hr


4 NFF Attrs, 10dB, 3 x 15dB, Working But Mediocre
 : 3 |   : 0

4 NFF Attrs, 1 x 10dB, 3 x 15dB, working but pretty mediocre. Bid price is for the lot of 4.  The 10dB is good to about 4GHz and the 15s to about 3GHz. Note that the horizontal axis is different to plots of the earlirer ones I put...

time left: 4 d, 0 hr


4 N MF Attenuators, 2, 7, 20 and 22dB, Working
 : 3 |   : 0

Lot of four Type N MF attenuators, 2, 7, 20 and 22dB, tested and working. The 2dB one is good to about 10GHz, the 7dB to about 5GHz, the 20dB is a bit hard to specify and the 22dB is good to about 3GHz Bid price is for the lot of...

time left: 3 d, 20 hr


4 NF NM Attenuators, 3, 8, 8 and 20dB, Working
 : 3 |   : 0

4 NF NM Attenuators, 3, 8, 8 and 20dB, tested and working. Marconi 3dB good to about 5GHz. PRD 8dB ones good to about 8GHz.  Amarin good to10GHz, OK to 20GHz.   Bid price is for the lot of 4.  Local pickup from near...

time left: 4 d, 19 hr