I'm looking for some help from someone with a bit of experience to set up my recently aquired Codan 9323 to use with LSB on the Ameture band. I can find lots of references on google, but most are old and have broken links or the links removed....
a nice SM220 station monitor, works well with inbuilt 2 tone generator will monitor up to 400w amplifier,
pick-up only, will not send.
Various microphones for sale -
Yaesu YD 148 $45
Yaesu YM 38 $45
Yaesu MD200 fitted with extra Heil HC5 insert $160 with both inserts, $145 Yaesu only.
Astatic Silver Eagle $145
Astatic Night Eagle $155
For sale is a very rare in Australia MFJ1263, had plans to use it but never eventuated.
Comes with 8 pin to modular lead and I can see heaps of uses but the amount of radios here, we have gone to individual mics for each radio.
Payment is by bank...
Icom SP33 high quality ext.base station speaker, medium density fibreboard tuned construction,designed for for Icom DSP enabled rigs,black colored.This is a high quality unit, with high quality audio reproduction.New approx $269-00.
This is a 5W SDR transceiver covering 80-10m recently produced by Hobby PCB. Full specs are on this page and on the wiki site liked from the bottom of the page: https://hobbypcb.com/rs-hfiq.
This unit is in as new condition and is housed in...
The sad passing of David Longford VK2DZ / VK2SSH yesterday, and Ken Jewell VK3AKK / VK3NW has occured. Will be missed.
David Burger VK2CZ
Wanted: Realistic HTX100 10m CW/SSB transceiver. I have had a couple of these in the past & let them move on. Would like to source one now for a new portable project.
Thanks for looking...de Doc/vk5bug
I have a mint President HR2510 with original box, All original Accessories including Mic, mobile bracket and manual. Has a service manual also.
I am selling some goodies to riase some funds for Ham Radio 2017 in July.
I bought this as a...
I have 3 sets of GU74b tubes spare for my ACOM 2000A Amplifier. I am yet to change a set and have had the amplifier for nearly 8 years. I doubt I will ever need these 3 sets.
So I am selling a pair of these Tetrodes to raise some funds for...
Simplex Auto semi automatic morse code key. Also PMG training manual 'Telegraph Traffic Procedure' c1950s
ICOM IC 706 in excellent condition, comes with original microphone and power cable.Great little radio to get started with or have as a backup. PHONE 0432659115 thanks.
MFJ Versa tuner.Handles up to 200 Watts.Has jacks at the back for coax,balanced feeder lines or a long wire(i.e. length greater than quarter wave).Comes with instruction leaflet.
Get your hands on this classic HF transceiver!.Comes without a mike because I bought this rig second hand and I did not get a mike with it but I used a 500 ohm dynamic mike from another Kenwood radio.I can supply this mike for extra $20 if you need...
Wanted FT840 in working condition. 0468480662
CHASING A USED YAESU FT 991 AT A DECENT PRICE....
Hi, Comet CF-706 Duplexer as new, pick up available can arrange drop off otherwise buyer pays postage.
Cheers Ric VK3ARK 0407109689
Hi, Comet CF-706N Duplexer with N connector for 75 - 550 Mhz as new hardly used. Pick up available or can arrange drop off otherwise buyer pays postage.
Cheers Ric VK3ARK 0407109689
Requesting a Bencher 2 Paddle CW Morse code telegraph key / keyer.
Looking for a HP3310A function generator, working and in good condition. Will pay reasonable price.
Thank you for looking.
Kenwood R2000 HF RX with optional VHF Converter installed...good working order...$295 + post
<p>The next bi-monthly ARNSW trash and treasure sale is being held Sunday the 28 th May. Gates open at 9:00 on site at 63 Quarry Rd Dural NSW. The trash and treasure sale is followed by the homebrew club meeting starting at 1:00pm.
<span style="font-size: 14pt;">Single lever paddle in "As New" condition.
</span><span style="font-size: 14pt;">For sale for less than half of what you would pay if bought in Australia, and that is, if one is available. Few outlets...
<p>Purchased for some specific P25 digital transmission experimenting and now no longer required.</p>
<p>Comes complete with all documentation, original packaging and is in absolutely excellent condition.</p>
<p>The Icom IC-R2500...
<strong>RF SOLUTIONS</strong> is offering the newly released ICOM IC-R8600 high performance, software defined receiver for wideband coverage (0.005 - 3335.00 MHz). Please visit our website at www.rfsolutions.com.au for further specifications....
Any one in South VK4 or North VK2 have a Nally they want to sell?
Please email me - firstname.lastname@example.org
Thanks for looking Andrew - VK4NM
Selling Behringer XENYX Q502 USB Mic Preamp mixer.
It is in brand new condition, used ONCE only for home recording. Still under warranty.
Comes with all original accessories in the box with invoice.
Date of purchase: 11/04/2017
This is one aftermarket LCD module to replace the hard to find and expensive Yaesu FT-897 and FT-897D LCD display.
Replacement requires sound electronic and soldering knowledge as the PCB tabs of the radio PCB are spaced 0.8mm.
However unlike the...
Motorola XTS2500 P25 portable in good condition works fine. It does have marks and scratches on the front panel. It is programmed with 40 channel UHF CB and some commercial channels. It is the S band, 450-520 MHz. It will go to 70cm but have...
Looking for an Icom IC703 10 watt mobile transceiver in excellent condition. If you have one that you would consider selling please contact me by email with price and particulars.
Looking for any TAIT TOPB200 or 400 Batteries..
New old stock or used taking charge
let me know your surplus and $$
Basically looking for a FT7 BANDSWITCH to restore existing unit or, a working FT7 at a reasonable price. VK4FO.
Wanted yaesu dmu 2000
<blockquote>Someone out there has a yaesu dmu 2000 with out the bourd that goes into a yaesu ft950 as i have just bought a ft950 and noticed it has one
So im on the hunt for the dmu 2000 unit.
If you have one for sale...
Home brew Artificial Ground Time to move on some of the items that are not being used to help fund other projects. I needed an artificial ground a little while ago for an experiment so I canibalised a MFJ 989 3 KW tuner for the project. All the...
Looking for any surplus glass mount mobile 2m 70 cm dual band antenna setups.
LIKE MFJ 1734 -
1 only set required.
If you have any not being used , send me some details
<span style="font-size: 18pt;">hi all i have my Mojo screwdriver Antenna up for sale if you want to know any info on it google vk2cd all the info is on his page it also has a adjustable whip </span>
Wanted yaesu ft 817ND in good condion also if you have any extras for the radio.
Please send pictures and info to 0421457183 thank you. Martin.
Cleaning out some boxes and found the following new and unused RT Systems USB programming cables and software. RT make the best quality prog cables and software in the ham radio world.
I have the following
Cables and Software
Looking for an antena tuner nothing to flash up to 100watts is good, auto / man not fussy. price let me know
Thanks for reading
0418 833 658
This rotator was my back - up rotator and has had 2 years use. The biggest in the range from kenpro with variable rotation speed and adaptable to some computerised rotator controllers. postage rate of $35 is for east coast only and will be dearer...
good condition, tests good
looking for a "TOP QUALITY FT501", I know there's a few out there, will pay good money for right radio, thanks Frank VK5KV...
<p>I have a Grundig Satellit 800 Millennium Shortwave/FM/AM/VHF receiver for sale for $650. It is in excellent condition(see photos below), except for some minor staining (cosmetic only) on the back.</p>
<p> Prefer local pickup...
<strong>Rotator & Controller With Rotor-Ez (Pre-Set) Kit Fitted, includes top mast clamps, plugs for control cable & revised manual. Fully Restored, Refurbished & Upgraded.</strong>
<em>Rotor-Ez by Ham Supply is a replacement...
<p>NERA WorldCommunicator (Remote area Satellite phone and data system)</p>
<p>This is a full function satellite data terminal allowing voice, data and telemetry to be sent to other telephone or computer systems worldwide.</p>
<strong>Rotator & Dual Speed Controller. Fully Refurbished & Upgraded. </strong>Includes<strong> </strong>plugs for control cable & revised manual + IEC power lead.<strong>
THE DS CONTROLLER:-...
<p>GME DC power supply model PSA 1225.</p>
<p>25 Amp DC with 35 Amp peak at 13.8 volts</p>
<p>The pictures tell the story and for part of the description.</p>
<p>Note that there is some scuffing on the rear of one of the heat...
<p>Twin output 100 Volt AC step down auto transformer from 240 VAC.</p>
<p>I bought this for a project and the project did not get off the ground so while it has been unpacked from its shipping box, it has been unused.</p>
<strong>CR-4 Controller & MR-750 Multi-Torque Rotator with 3 motor units fitted & Top mast clamp + copy of manual.</strong> Basic Refurbishment & services etc.
This Rotator can be upgraded to four motor units to give more...
<strong>CR-4 Standard Controller & MR-300 Medium Speed Multi-Touque Rotator with one motor unit fitted & Top mast clamp + copy of manual. Basic Refurbishment & serviced etc.
<em>This rotator can be upgraded to two, three or four...