Featured in Wanted

Sort By:   GridListGallery

Newest Classifieds in  Wanted

$0

 : 0 |   : 0

WANTED Looking for a friend,  Kenwood ts-850sat with built in antenna tuner, Must be the latest version with a higher serial number as the first production runs had issues with capacitor failures and the DDS chips would crap out and burn!!!...

$1

 : 0 |   : 0

Wanted> info on the com-an-tena 5 band vertical for HF (80-40-20-15-10) , i have the 1992 version (date on the instuction sheet) , i assume its the 1st version and it has been said there is a 2nd version? . A copy of the info sheet or...

$0

WANTED: ALL STAR RTCM
 : 1 |   : 0

WANTED : As shown one RTCM allstar unit. If you have an un used one or one that is no longer required I am looking for one. Stu VK4SZ

$1,234

Icom - AH - 760
 : 1 |   : 0

Looking for a Icom AH-760 please - picture for attention Albert VK3FIRE 0477299446

$0

 : 0 |   : 0

Hi fellow hams ,i am putting together a MMDVM simplex repeater and i am after some second hand motorola   working mobile radios. Gm338 ,gm340,gm360,gm380 cdm1550ls etc ,tell what you got and do not need, uhf 25-40 watts ,send me an email...

 : 0 |   : 0

Hello, On the hunt for another DVMEGA UHF Board, Doesn't matter what the firmware version is... Must be the single Band UHF version only.

$0

 : 0 |   : 0

Hello, On the hunt for a NW Digital DV3000 Dongle, Let me know if you have one your wanting to move on for a reasonable Price! 73

$0

 : 0 |   : 0

Hi all, im looking for a couple off 144mhz 500/1000watt Elements too suit a Bird Model43 watt meter. im also looking for one that will good too 1300mhz 200/300watts too suit the Bird 43.  If you have any spare and would like to sell them...

$0

 : 0 |   : 0

Hi, I'm looking for a CTCSS tone board for a yaesu FT411 (same board shared by different yaesu radios). Let me know if you have something I can use (NOS or from your scrap box) and your price. 73, Carlos.

$0

Rotary Numerical Dial and Bandswitch decal
 : 1 |   : 0

I am looking for a more elegant rotary numerial dial counter, to be used to control the position of my vacuum varialble in my valve HF amp. 1/4 inch (6.3mm) shaft. The repaired rotary dial I have works is OK, but does not look so great and has...

CQ ICOM OPC EXPERTS
 : 3 |   : 0

ICOM OPC CABLE MYSTERY Gday See photos. Looking for info on this ICOM OPC. Any info you have very much appreciated as i would like to sell it, but i do not know the <strong>model number of the OPC.</strong> Large plug to fit the...

$0

 : 0 |   : 0

Like most other 160 AM operators, I too am looking for a 1870 kHz crystal. 1843 used to be where AM could be found on 160 because of crystal availibility, but recent WIA band plan changes have given 1840USB to FT8 digital mode. I would like to...

$0

Uniden 2020
 : 1 |   : 0

Howdy, just nearly finished reconditioning a Uniden 2020 and chasing an external VFO and Speaker, if you have a radio as well and its the only way for me to access the bits, I will buy the entire lot and keep the other radio as a spare so no hassles...