Category: Main > Antennas/Tuners > Towers/Masts

NEW ELEVATED LAY-OVER MAST SUPPORT, ALL ALUMINIUM  - $1,000 Listing ID: 16064



Classified Info

Listing Began: Jun 17 10:59
Number of Times Viewed: 2943
  • 05 MS welded07.jpg
  • Maroota Elevated lay-over mast.jpg
  • 06 MS welded10.jpg
  • 10 MS welded02.jpg
  • 16 MS welded19.jpg
  • 17 MS welded08.jpg
  • 23 Mast Support 034.jpg
  • 21 Mast Support 032.jpg
  • 19 MS welded15.jpg
  • 04 MS welded05.jpg
  • 13 MS welded26.jpg
  • 08 MS welded11.jpg
  • 32 winch.jpg
  • 33winch.jpg
  • 35winch.jpg
  • 36clamp.jpg
  • 37clamp.jpg

Description

Seller's Comments and Description:

FOR SALE ON BEHALF OF A FRIEND.
(Stored inside warehouse @ Arndell Park 2148, west of Sydney).
NEW, Never Installed & has never been outside.
Here we have a purpose built 5.5m All Aluminium Elevated Lay-Over Mast Support.
The 63.5 x 6.35mm wall x 6.5m structual aluminium round tube (which make up the total height of 9.6m) is NOT included.

This structure was designed & built to be mounted onto the side of a building & the elevated pivot point of the 63.5mm mast section was to get over top of equipment on the ground.
The project was scraped before mast support was finished & now the Mast Support must go, SOLD AS IS.
The back bone of the structure is a 5.5m structural U channel 101.6 x 50.8 x 7.9mm, other materials are 32sq  tube x 3mm runners, 31.6 x 6mm flat bar diagonal bracing, 160 x 280 x 10mm flat bar winch mount, 50 x 12mm & 80 x 10mm flat bar strenghing plates & braces, 32 x 3 u channel gussets & lots more. The whole structure has been bolted with S/S nuts bolt & screws then welded.
Included a specially mast clamp which was made from a 93mm solid round bar, that was bored out to 63.5mm then machined for the 4 x M8 bolts & followed by cutting out of the 5mm clamping gap. 
The hand winch is a RigMate (by A.Nobles & sons) rated @ 500kg lift with 5mm S/S wire rope.
The winch was mounted to the top of the structure to be operated from the roof of the support buliding, mainly for security. I have lots of photos & basic plans etc.
Contact Peter 0427 043 054


Details

Manufacturer Purpose built
Model 9.6m Elevated Layover Mast
Year of Manufacture 2016
Condition of Item As New
Accessories Included 500kg brake winch, Special mast clamp & some Hardware
Postage / Freight Pickup Available





Advertisement

<< Previous Next >>