Category: Main > Transceivers > HF

Yaesu FT450D, HF Transceiver orig box books etc  - $750 Listing ID: 25361

Classified Info

Listing Began: Jun 29 13:30
Number of Times Viewed: 537




Seller's Comments and Description:

Yaesu FT450D in original box, surplus to needs here
$750 plus post
Can ship Aust wide, 
Brenton VK3CM Ph 0418 844700 or email

Features Improvements Over The FT-450/AT

  • 400 MHz built-in IF
  • Built in Antenna Tuning System
  • Classically Designed Knobs
  • Included Dynamic hand mic
  • Key Illumination
  • Foot Stand
  • 500 & 300 Hz CW Filters
Compact Size & Lightweight

The FT-450 is compact 9”W x 3.3”H x 8.5”D, lightweight 7.9 pounds package designed to be used as a desktop radio at home or in portable applications. The FT-450 can also be used mobile with the MMB-90 convenient mobile bracket accessory. Besides home or mobile operation, this easy to pack radio is a DXpeditioner or Emergency Service Providers dream come true - compact, lightweight, high performance receiver, and 100 watts on 160 through 6 meters.

Power Requirements

The FT-450 can be powered by any convenient 13.8 VDC 22 amp external power source.

Large Easy-to-Read LCD Display

You will love the FT-450 9-segment Black-Nega type LCD frequency display with larger-than-normal easy to read characters.

400 MHz built-in IF DSP IF Roofing Filter

The FT-450 includes a 10 kHz bandwidth Roofing Filter in the 68 MHz first IF, right after the first mixer. This filter provides narrow-band selectivity to protect the following IF and DSP stages – a feature rarely found in rigs in this price range!


The FT-450 IF Width and IF Shift features are the primary tools you should use for best interference reduction.

After narrowing the bandwidth (Width) and/or adjusting the center of the passband (Shift), the Contour control (see details of this feature below) may also yield additional signal-enhancement benefits on the net residual bandwidth. What’s more, the IF Notch Filter (see details of this feature below) may also be utilized in conjunction with the three other filter systems to significant advantage.

The IF WIDTH tuning system allows you to vary the width of the DSP IF passband to eliminate interference. Moreover, the bandwidth may actually be expanded from its default setting, should you wish to enhance incoming signal fidelity when interference on the band is low. The IF WIDTH is varied in steps: SSB - 1.8/2.4/3.0 kHz. AM - 3.0/6.0/9.0 kHz. FM - 2.5/5.0. CW - 0.5/1.8/2.4 kHz. kHz.

The IF SHIFT tuning system allows you to vary the DSP filter passband higher or lower, without changing the pitch of the incoming Signal to reduce or eliminate interference. Because the carrier tuning frequency is not varied, there is no need to re-tune the operating frequency when eliminating the interference. The total passband tuning range for the IF Shift system is ±1 kHz. Rotate the [SHIFT] knob to the left or right to reduce the interference. You may observe the position of the passband in the “SHIFT” indicator of the DSP Graphic Display portion of the LCD front panel main display.


The Contour filtering system provides a gentle shaping of the IF filter pass band to suppress or enhance particular frequency components, thus improving the sound and/or readability of a received signal. The DSP Contour filter is a unique capability of the receiver, providing either Nulling or Peaking of tunable segments of the receiver passband to suppress interference or excessive frequency components on an incoming signal, or to peak those tunable frequency segments. The amount of Nulling / Peaking and the bandwidth over which it is applied are adjustable via the Menu. The peak position of the contour filter is graphically depicted in the “CONTOUR” indicator of the DSP Graphic Display portion of the LCD front panel main display. SPECIAL FILTERING NOTE: The steep slopes of the DSP filtering can, when adjusted aggressively, impart an unnatural sound to an incoming signal. Often, a narrow bandwidth is not the key to improving copy. The incoming signal itself may have undesirable or excessive frequency components. By judicious use of the Contour filter, the “shoulder” of the passband response may be altered, or components removed from within the passband, allowing the desired signal to rise above the background noise and interference in a manner not obtainable with other filtering systems.


The IF Notch filter is a highly effective system that allows you to slice out an interfering beat note or other carrier signal from inside the receiver passband. You may observe the graphically depicted peak position of the IF Notch filter in the “NOTCH” indicator of the DSP Graphic Display portion of the LCD front panel main display.

DNR - Digital Noise Reduction

The Digital Noise Reduction (DNR) feature utilizes eleven (11) different mathematical algorithms to analyze and suppress different noise profiles encountered on the HF/50 MHz bands. You get to choose the selection that provides the best noise suppression. The DSP’s Digital Noise Reduction (DNR) system is designed to reduce the level of random noise found on the HF and 50 MHz bands. It is especially effective during SSB operation. Any of eleven different noise-reduction algorithms can be selected. Each of these algorithms was created for dealing with a different noise profile. You will want to experiment with the DNR system to find the best setting according to the noise currently being experienced that concurrently will allow the signal to rise up out of the noise.

Manual Notch Filter

The FT-450 Manual Notch Filter is a highly-effective system that slices out an interfering beat tone/signal

Digital Microphone Equalizer

Custom set your rig to match your voice characteristics for maximum power punch on the band.

Other Features
  • Built-In Electronic Keyer
  • Memory Keyer
  • Spotting (Zero-Beating) CW Training Feature
  • Beacon Function (up to 118 characters)
  • Rugged die-cast aluminum chassis
  • Thermostatically controlled cooling fan
  • Dedicated Data Jack for FSK-RTTY operation
  • CAT System (D-sub 9 pin): Computer programming
  • Versatile Memory System
  • 500 memory channels with 13 Memory Groups
  • My Band / My Mode function to recall personal favorites
  • CTCSS Operation (FM)
  • IPO/ 20 dB ATT built-in
  • CLARIFIER adjustment
  • QUICK SPLIT automatically set higher than the Main Frequency
    TXW feature to monitor the xmit frequency when split
Important Feature For Visual Impaired Operators

Digital Voice Announcement - Select Frequency, Mode, Meter Reading


Manufacturer Yaesu
Model FT450D
Condition of Item Excellent
Accessories Included Box books power cord mic
Postage / Freight Buyer Pays


<< Previous Next >>