Category: Main > Transceivers > HF

Flex6700 SDR with remote iPad fully loaded. $6000  - $6,000 Listing ID: 16828

Classified Info

Listing Began: Jan 8 22:32
Number of Times Viewed: 349


  • flex1.jpg
  • flex2.jpg
  • flex3.jpg
  • flex4.jpg



Seller's Comments and Description:

For sale is a complete turnkey solution Flex6700 with Ipad configured to remote usage anywhere around the world. Operate on multiple frequencies in your hotel room anywhere in the world using your Flex6700 based back at home. When at home, bring up multiple receivers and enjoy the world of diversity receive, just amazing technology. You can pay $11000 new for just the Flex 6700 here in Australia or an as new unit with a brand new configured ipad with the version 2.0 upgrades paid for and done for $6000
Flex have made some incredible advances with the 6700, whoever gets this unit is saving a bucket load of money and getting the best that I believe is available in SDR today.

FLEX-6700 for the Most Demanding Amateur
The FLEX-6700™ is for the most demanding amateur radio operator who desires the ultimate on-air experience. With dual spectral capture units (SCUs), the FLEX-6700 allows multiple active antennas providing reception and unprecedented spectrum visibility across up to eight panadapters and waterfalls. The FLEX-6700’s dual-stage RF preamplifiers enhance weak signal reception up through six meter and two meter bands*. Total flexibility and the highest performance sets the FLEX-6700 apart from other radios.

Maximum Slice Receivers: Eight (8)
Maximum Panadapter Bandwidth: 14 MHz
Antenna Connectors: SO-239x2; BNCx2; XVTR-BNCx1
Wideband Frequency Coverage: 30 kHz - 72 MHz; 135 - 165MHz
Transmit Frequency Coverage: 160-6m amateur bands, 100W nominal output
Transverter IF Frequency Coverage*: 100 kHz - 72 MHz; 135 - 165MHz
Digital Audio Exchange (DAX) Channels: Eight (8)
DAX IQ Channels/Bandwidth per Channel (DAXIQ): Four (4) @ 24 kHz - 192 kHz
Preselectors: 160 - 2m (except 60m)
Microphone Connectors: Unbalanced 8-pin Foster, Balanced XLR/TRS
Antenna Tuner Unit (ATU): Integrated
Full Continuous Coverage Transmit: MARS/CAP Capable
Receiver Specifications
Receiver Architecture: Direct Digital Sampling
Spectral Capture Units: Two (2)
Maximum Slice Receivers: Eight (8)
Maximum High Resolution Spectrum Displays: Eight (8)
Maximum Panadapter Width: 14 MHz
ADC Resolution: 16-bits
ADC Sampling Rate: 245.76 Msps
Wideband Frequency Coverage: 30 kHz - 72 MHz; 135 - 165 MHz
DAX IQ Channels / Bandwidth Per Channel: Four (4) @ 24 kHz - 192 kHz
DAX Audio Channels: Eight (8)
Amateur Band Preselector Coverage: 160m - 6m (except 60m)
Preamplifiers / Attenuators: -10 to +40 dB
Spurious and Image Rejection Ratio: 100 dB or better
External Powered Speaker Output Impedance Level: 600 Ohm Stereo Unbalanced
Transmitter Specifications
Transmitter Architecture: Direct Digital Up-conversion
TX DAC Resolution: 16-bits
TX DAC Sampling Rate: 491.52 Msps
RF Output Power: 1-100W nominal SSB, CW, FM, RTTY, Digital; 1-25W nominal AM
Amateur Band Coverage at Rated Power Output: 160m – 6m
Low Pass PA Filter Bands: 1.8 MHz - 30 MHz continuous, 50 MHz - 54 MHz
Transverter IF Output Power: +0 dBm Typical; +15dBm max (+7 dBm, 2m)
Transverter IF Frequency Coverage: 100 kHz - 72 MHz; 135 MHz - 165 MHz
Modulation System: Digital Low Power at Carrier Frequency
Maximum FM Deviation: ±5 kHz
DAX Transmit Channel: Yes
Carrier / Unwanted Sideband Suppression: <-80 dBc typ / <-80 dBc typ
Spurious Emissions 1.8 - 50 MHz Amateur Bands: <-55 dBc; -65 dBc 6m
Transmit Bandwidth: Default 100-2900 Hz (Variable 50-10000 Hz)
Microphone Connectors: Unbalanced 8-pin Foster, Balanced XLR/TRS
Microphone Impedance: 600 Ohms Nominal (200-10kΩ)
Antenna Tuner Specifications
Matching Range 80m - 10m: 8.3 Ohms - 300 Ohms
Matching Range 160 and 6m: 16.7 Ohms - 150 Ohms
General Specifications
USB 2.0 Ports (peripheral control): Two (2)
Master Clock Frequency: 983.04 MHz
Master Clock Phase Noise: -147 dBc@ 10 kHz; -152 dBc@ 100 kHz
10 MHz Reference Clock Stability: 0.02ppm OCXO
GPSDO Frequency Stability (GPS locked): 1 5 x 10 (-12) over 24 hours
Emission Modes: USB, LSB, CW, RTTY 2 , AM, Synchronous AM, FM, NFM, DFM
Frequency Resolution: 1 Hz min.
Antenna Connectors: SO-239x2, BNCx2, XVTRx1
Antenna Impedance (w/o tuner): 50 Ohm Unbalanced
Power Supply Requirements: +13.8V DC nominal ±15%
Current Drain (Receive/Transmit Max): 3A / 23A @ 13.8V
Height: 4" (10.2 cm) with feet; 3.5" (8.9 cm) without feet attached
Width: 13" (33 cm)
Depth: 12" (30.5 cm) or 13" (33.04 cm) with front handles
Weight: Approximately 13 lbs. / 5.9 kgs


Manufacturer flex
Model 6700
Condition of Item Excellent
Accessories Included iPad/version2 software
Postage / Freight Buyer Pays


<< Previous Next >>