Category: Main > Commercial - Dealer Only > Rotators

EMOTATOR 105TSX Rotator Set Refurbished & Upgraded  - $450 Listing ID: 23639



Classified Info

Listing Began: Mar 14 17:33
Number of Times Viewed: 39
  • Silver01-001.jpg
  • Silver01-002.jpg
  • silver01-004.jpg
  • silver01-003.jpg
  • silver01-005.jpg
  • silver01-006.jpg
  • 01-01-018s.jpg
  • 11-02-010a.jpg
  • 01-01-004.jpg
  • 01-01-007.jpg
  • 01-01-008.jpg
  • 11-02-018.jpg
  • 01-01-013.jpg
  • 01-01-014.jpg
  • 01-01-015.jpg
  • 01-01-022.jpg
  • 01-01-025.jpg

Description

Seller's Comments and Description:

Rotator Set With Standard Full Circle Display Controller, Refurbished & Upgraded ETC.
Rotator & mast clamp are Silver in colour
Includes top mast clamp, plugs for control cable, IEC power lead plus revisied manual.

Wind Area........................1.0m Sq
Rotation Torque...............5.0 kg/m
Brake Torque...................30 kg/m
Mast size..........................31 ~ 61mm Dia.
Rotation Time..................65 seconds 360 degrees
Rotator Voltage................24v AC
Controller voltage............240v AC
Warranty...........................24 month

This rotator set suited for small HF yagis etc & VHF / UHF arrays etc.

The TSX Controller:- Full Circle display with momentary & lift to lock direction switch.
Disasembled, cleaned & prep chassis for upgrades & new parts.
The back panel:- Installed a new 8 pin Cinch socket & laser cut S/D cover/mounting plate, New fused IEC socket & earth bolt.
On the inside:- Upgraded the display illumination with 2 x 3 LED module & there power supply.
Refurbish the POT & display drive train.
Re-assembled, fully tested & aligned with the rotator.

The 105 Rotator:Has a 24v AC motor & lift disc brake mounted on the motor.
Disassembled to the last nut, bolt & screw. Cleaned & checked all parts for damage.
Replaced limit switches & refurbished the POT.
All housings & mast clamps/brackets have been Glass Bead Blasted by IMPACT GLASS BEAD then painting in etch primier followed by several coats of Gloss Aluminium (Silver) Epoxy Enamel then finished of with a few coats in clear enamel.
The stainless steel 'U' bolt & hardware were cleaned in a special solution.
The gears were aligned & shimmed in there sub chassis, then re-assembled into the refurbished housings with new bearings & new grease through out.
Re-aligned & calibrated with the controller.
Supplied with upper mast clamp, mounting & clamping hardware etc. 

240v AC, 24 month warranty.

This rotator Set is available for exchange, view details on my web site.
Contact Peter of DUORO Rotator Services on mob. 0427 043 054


Details

Manufacturer Emotator
Model 105TSX
Condition of Item Excellent
Accessories Included Top mast clamp & hardware, Plug for control cable, IEC power lead + revised manual
Postage / Freight Pickup Available





Advertisement

Next >>