Category: Main > Commercial - Dealer Only > Rotators

EMOTATOR 105TS Rotator Set Refurbished & Upgraded  - $450 Listing ID: 23637



Classified Info

Listing Began: Mar 14 17:32
Number of Times Viewed: 29
  • 20-02-023.jpg
  • 20-02-024.jpg
  • 20-02-025.jpg
  • 20-02-026.jpg
  • 20-02-027.jpg
  • 20-02-029.jpg
  • 20-02-030.jpg
  • 20-02-032.jpg
  • 20-02-033.jpg
  • 20-02-001.jpg
  • 20-02-009.jpg
  • 20-02-011.jpg
  • 20-02-012.jpg
  • 20-02-016.jpg
  • 20-02-013.jpg
  • 20-02-014.jpg
  • 20-02-017.jpg
  • 20-02-018.jpg
  • 20-02-019.jpg
  • 20-02-021.jpg

Description

Seller's Comments and Description:

Rotator Set With Standard Full Circle Display Controller, Refurbished & Upgraded ETC.

Includes top mast clamp, plugs for control cable, IEC power lead plus revisied manual.
Wind Area.........................1.0 m Sq
Rotation Torque................5.0 kg/m
Brake Torque....................30 kg/m
Mast size...........................31 ~ 61mm Dia.
Rotation Time...................65 seconds 360 degrees
Rotator Voltage.................100v AC
Controller voltage.............240v AC
Warranty............................24 month 

This rotator set suited for small HF yagis etc & VHF / UHF arrays etc.

The TSX Controller:- Full Circle display with momentary & lift to lock direction switch.
Disasembled, cleaned & prep chassis for upgrades & new parts.
The back panel:- Installed a new 8 pin Cinch socket & laser cut S/D cover/mounting plate, New fused IEC socket & earth bolt.
On the inside:- Upgraded the display illumination with 2 x 3 LED module & there power supply.
Replaced the direction display overlay & refurbish the POT. Installed new transformers
Re-assembled, fully tested & aligned with the rotator.

The 105 Rotator:Has a 10v AC motor & lift disc brake mounted on the motor.
Disassembled to the last nut, bolt & screw. Cleaned & checked all parts for damage.
Replaced limit switches & refurbished the POT.
All housings & mast clamps/brackets have been Glass Bead Blasted by IMPACT GLASS BEAD followed by painting in Pewter Epoxy enamel.
The stainless steel 'U' bolt & hardware were cleaned in a special solution.
The gears were aligned & shimmed in there sub chassis, then re-assembled into the refurbished housings with new bearings & new grease through out.
Re-aligned & calibrated with the controller.
Supplied with upper mast clamp, mounting & clamping hardware etc. 

240v AC, 24 month warranty.

This rotator Set is available for exchange, view details on my web site.
Contact Peter of DUORO Rotator Services on mob. 0427 043 054


Details

Manufacturer Emotator
Model 105TSX
Condition of Item Excellent
Accessories Included Top mast clamp & hardware, Plugs for control cable, IEC power lead + revised manual
Postage / Freight Buyer Pays





Advertisement

<< Previous Next >>