Category: Main > Commercial - Dealer Only > Rotators

EMOTATOR 1102MSX Rotator set.  - $700 Listing ID: 19811



Classified Info

Listing Began: Jul 4 17:58
Number of Times Viewed: 1
  • 29-06-001a.jpg
  • 29-06-004.jpg
  • 29-06-005.jpg
  • 29-06-006.jpg
  • 29-06-008.jpg
  • 29-06-010.jpg
  • 29-06-013.jpg
  • 29-06-014.jpg
  • 29-06-016.jpg
  • 29-06-019.jpg
  • 29-06-021.jpg
  • 29-06-023.jpg
  • 29-06-025.jpg
  • 29-06-026.jpg
  • 29-06-029.jpg
  • 29-06-030.jpg
  • 29-06-032.jpg
  • 29-06-034.jpg
  • 29-06-036.jpg
  • 29-06-041.jpg

Options

  • $75

Description

Seller's Comments and Description:

Refurbished & Upgraded.
Includes top triple clamping self centering mast clamp, plugs for control cable.

Wind Area ............. 2.5m Sq.

Rotation Torque ..... 8.0kg/m.
Brake Torque ......... 100kg/m.
Rotation Time ........ 80 seconds 360 degress,
Mast Clamp ............ 38 ~ 63mm.
Rotator Voltage ...... 100vAC.

The MSX Controller
:- Full Circle display with dual action direction/brake switches.
Disassembled, cleaned & prep chassis for upgrades & new parts.
Installed dual action direction/brake switches, these switches are set in a delay action, first stage releases the brake & the second stage activates the direction, then the lever can be lifted into the lock position.
The back panel:- Install a new 8 pin Cinch chassic socket & laser cut mounting plate, New fused IEC 240v socket & earth bolt.
On the inside:- Install aluminium mounting plate for the transformers, NEW Australian made 240v in 100v out transformer, Upgraded the display illumination with 2 x 3 LED modules & there power supply, Refurbished the POT & display drive train, Installed new display drive belt, Fully re-wired.
Reassembled, fully tested & aligned with the rotator.
Supplied with NEW 8pin Cinch plug for the control cable & IEC power lead.

The 1102 Rotator
:- With twin wedge solenoid activated brake system.
Completely disassembled, cleaned & checked all parts.
All housings were Glass Bead Blasted, etch primied & sprayed in silver epoxy gloss paint, followed by a few coates of clear enamel.
Replaced the limit switches, Refurbished the POT, Installed NEW POT drive & divider gears, Install NEW 7 pin IP67 rated socket for control cable with new S/S cover plate, supplied with new 7 pin IP67 rated plug for the control cable.plug/socket.
Replaced the limit switches & refurbished the POT/gearing.
Refurbished the solenoid brake system, Stripped & cleaned the motor + installed new ball races.
The gears were aligned & shimmed in there sub chassis then installed into the refurbished housings with new bearings & new grease through out.
Aligned & calibrathed with the controller.

Supplied with NEW MC1213 triple clamping self centering top mast clamp, New stainless steel mounting hardware, plug for control cable.

240v AC. 24 month warranty.
This rotator set is available for exchange (see details on my web site).
Contact Peter of DUORO SERVICES on 0427 043 054.


Details

Manufacturer Emotator
Model 1102MSX
Condition of Item Excellent
Accessories Included Top mast clamp & hardware, Plugs for control cable + revised manual
Postage / Freight Pickup Available





Advertisement

<< Previous Next >>