Category: Main > Commercial - Dealer Only > Rotators

EMOTATOR 105TSX Rotator Set Refurbished & Upgraded  - $400 Listing ID: 17897



Classified Info

Listing Began: Mar 5 16:30
Number of Times Viewed: 44
  • 10-02-001.jpg
  • 10-02-004.jpg
  • 10-02-005.jpg
  • 10-02-006.jpg
  • 10-02-007.JPG
  • 10-02-009a.jpg
  • 10-02-011a.jpg
  • 10-02-013a.jpg
  • 10-02-014a.jpg
  • 10-02-015a.jpg
  • 10-02-019.jpg
  • 11-02-010a.jpg
  • 11-02-011a.jpg
  • 11-02-012.jpg
  • 11-02-013.jpg
  • 11-02-016a.jpg
  • 11-02-018.jpg
  • 11-02-015a.jpg
  • 11-02-023.jpg
  • 11-02-024.jpg

Options

  • $60

Description

Seller's Comments and Description:

Rotator Set With Standard Full Circle Display Controller, Refurbished & Upgraded ETC.

Includes top mast clamp, plugs for control cable, IEC power lead plus revisied manual.
(Lower mast clamp available on request).

Wind Area......................1.0m Sq
Rotation Torque...............5.0 kg/m
Brake Torque...................30 kg/m
Mast size.........................31 ~ 61mm Dia.
Rotation Time...................65 seconds 360 degrees
Rotator Voltage.................24v AC
Controller voltage..............240v AC
Warranty...12 month (extendable to 24 month for an extra $100.00)

This rotator set suited for small HF yagis etc & VHF / UHF arrays etc.

The TSX Controller:- Full Circle display with momentary & lift to lock direction switch.
Disasembled, cleaned & prep chassis for upgrades & new parts.
The back panel:- Installed a new 8 pin Cinch socket & laser cut S/D cover/mounting plate, New fused IEC socket & earth bolt.
On the inside:- Upgraded the display illumination with 2 x 3 LED module & there power supply.
Replaced the direction display overlay & refurbish the POT.
Re-assembled, fully tested & aligned with the rotator.

The 105 Rotator:Has a 24v AC motor & cork pad lift disc brake mounted on the motor.
Disassembled to the last nut, bolt & screw. Cleaned & checked all parts for damage.
Replaced limit switches & refurbished the POT.
All housings & mast clamps/brackets have been Glass Bead Blasted by IMPACT GLASS BEAD followed by painting in clear enamel.
The stainless steel 'U' bolt & hardware were cleaned in a special solution.
Replaced the original control cable terminal block & cover with a Amphenol LTW IP67 7 pin round socket mounted on a laser cut S/S mounting plate.
The gears were aligned & shimmed in there sub chassis, then re-assembled into the refurbished housings with new bearings & new grease through out.
Re-aligned & calibrated with the controller.
Supplied with upper mast clamp, mounting & clamping hardware etc. 

(Lower mast clamp available on request).


240v AC, 12 month warranty (extenable to 24month for an extra $100.00).

This rotator Set is available for exchange, view details on my web site.
Contact Peter of DUORO Rotator Services on mob. 0427 043 054


Details

Manufacturer Emotator
Model 105TSX
Condition of Item Excellent
Accessories Included Top mast clamp & hardware, Plugs for control cable, IEC power lead + revised manual
Postage / Freight Pickup Available





Advertisement

<< Previous Next >>