Category: Main > Commercial - Dealer Only > Rotators

KENPRO KR-800s, Basic refurbishment & service etc.  - $450 Listing ID: 16806



Classified Info

Listing Began: Dec 24 14:17
Number of Times Viewed: 258
  • 02-12-000a.jpg
  • 02-12-002a.jpg
  • 02-12-005a.jpg
  • 02-12-011a.jpg
  • 02-12-012a.jpg
  • 02-12-014a.jpg
  • 02-12-015a.jpg
  • 02-12-006a.jpg
  • 02-12-026a.jpg
  • 02-12-028a.jpg
  • 02-12-033a.jpg
  • 02-12-034a.jpg
  • 02-12-035a.jpg
  • 02-12-007a.jpg
  • 02-12-008a.jpg
  • 02-12-010a.jpg
  • 02-12-027a.jpg
  • 02-12-029a.jpg
  • 02-12-031a.jpg
  • 02-12-032a.jpg

Options

  • $65

Description

Seller's Comments and Description:

Basic Refurbishment & Serviced etc.
Standard 'S' version controller & 800 rotator with top mast clamp, plugs for control cable,  hardware & manual. Lower Mast Clamp available on request.

Wind Area...........................2.0m Sq.
Rotation Torque..................8.0 Kg/m
Brake Torque......................40 Kg/m
Brake type..........................BK spring, rotor & drum

Mast Size............................40 ~ 63mm
Rotation Time.....................55 seconds 450 degrees
Control Cable......................5 core
Rotator Voltage...................24v DC

The 'S' Version Controller:- Serviced & cleaned etc. In good Condition
Has full circle direction display with rocket direction switch.
Disassembled & cleaned etc. 
The Back Panel:- Installed a new 6 pin Molex type socket.
Re-assembled, fully tested, aligned & calibrated with the rotator.
Supplied with new safety power plug & 6 pin molex plug.
THE 800 Rotator:- In very good mechanical condition, paint has chips & scratches etc.
Basic Refurbishment & serviced etc.
Completely stripped down to the last nut, bolt & screw, then cleaned & checked all part for damage etc. Refurbished the POT. Replaced original socket with NEW Amphenol LTW IP67 5 pin type. All gears are in very good condition. Replaced the ball bearings with new & reassembled with new grease through out.
Re-aligned & calibrated to the controller.
Supplied with New Amphenol LTW 5 pin plug & replacement mast clamp set in good condition.
Lower Mast Clamp available on request.
Mains input voltage 240v AC. 12 month warranty.
Contact Peter of DUORO SERVICES on 0427 043 054.


Details

Manufacturer Kenpro
Condition of Item Used
Accessories Included Top Mast clamps & hardware, plugs for control cable
Postage / Freight Pickup Available





Advertisement

<< Previous Next >>