Category: Main > Commercial - Dealer Only > Rotators

SIDE MOUNT BRACKETS for Rotator & Mast Bearing  - $275 Listing ID: 13638



Classified Info

Listing Began: May 6 17:48
Number of Times Viewed: 527

502_RC5-B.JPG

  • 502_RC5-B.JPG
  • SMB65-ssB3.JPG
  • SMB65-ssR3.JPG
  • 10-11-003-B.JPG
  • 600_1103-B.JPG
  • Ham4_T2X-B.JPG
  • MR750_2-B.JPG
  • SBaseView-B.JPG

Description

Seller's Comments and Description:

DUORO SMB65ssB & SMB65ssR SIDE MOUNT BRACKETS (platforms).
PRICE IS FOR ONE BRACKET ONLY.
Each bracket is made for 3mm stainless steel, Laser Cut, Computer Folded then Welded, supplied with S/S backing plate & 6 x 65mm M8 S/S hex bolts, nuts & washers.
A minimum of two brackets are needed (1x SMB65ssB & 1x SMB65ssR), for added rotator protection a second SMB65ssB can be used.   
The SMB65ssB Bracket is for Mast Thrust Bearings from CREATE (CK-46) & Yaesu (GS-65) (bearings not included), for rotating mast sizes 50 ~ 65mm dia. (Weight 1.82kg)
The SMB65ssR Bracket is for most rotators with 4 ~ 6 mounting bolt patterns, including CREATE, EMOTATOR, KENPRO, PST 641 & 2051, CDE/HyGain, YAESU etc. (Weight 1.86kg).
Support mast/pipe sizes etc:-
50 ~ 68mm dia. Round tube or pipe.
65 ~ 68mm SQUARE tube (using longer bolts)
Flat surface 100mm+ width (using screws or bolts)
FEATURES :- 
Side access spanner holes, bolt holes for locking to support mast.
SMB65ssR features :- CDE/HyGain wiring access hole + T2X rotators can use all 6 mounting holes, The centre of the bracket is solid which protects CREATE rotators, since all the weight from the mast is in the middle of the lower housing,
Bonus features :- All rotators that have breather holes in the bottom now have air flow by way of the CDE/HyGain wiring access hole.
Contact Peter from DUORO SERVICES mob 0427 043 054


Details

Manufacturer DUORO SERVICES
Model SMB65ssB SMB65ssR
Year of Manufacture 2018
Condition of Item New
Accessories Included Stainless steel backing plate & hardware
Postage / Freight Pickup Available





Advertisement

<< Previous Next >>